भौतिक शास्त्रय्, बल धागु वस्तुय् प्रवेग (एसेलेरेसन) देकिगु वा एसेलेरेसन दुगु वस्तुय् एसेलेरेसन म्होयाइगु प्रभाव खः।
- बलयात दक्ले न्हापां आर्किमिडिजनं बयान याना दिल।.
- ग्यालिलियो नं rolling balls छ्येला एरिस्टोटलयु गुरुत्वाकर्षण सिद्धान्त मखुगु पुष्टि याना दिल।(१६०२ - १६०७)
- आइज्याक न्युटन नं बलयु दक्ले न्हापांगु गणितीय परिभाषा बियादिल।.
- चार्ल्स कुलम्ब नं एलेक्ट्रिक चार्जतेगु दथुइ बलयागु इन्भर्स स्क्वायर विधान पलिस्था याना दिल (ई सं १७८४)
- Henry Cavendish's in 1798 measured the force of gravity between two masses (in torsion balance experiment)
- With the development of quantum field theory and general relativity in 20th century it was realised that “force” is strictly a concept which arises from each theory in a totally different way and in both theories, it is only a helping concept which cannot be physically correct. In QFT, the force is arising from conservation of momentum of interacting elementary particles. In GR, the gravitational force is arising from a curved spacetime. Thus currently known fundamental forces are not called forces but “fundamental interactions”.
Aristotle and others believed that it was the natural state of objects on Earth to be motionless, and that they tended toward that state (eventually settling down to inertness), if left alone. This was a common experience of humans with ordinary conditions in which friction was involved, so Newton's idea that force naturally produces a constant increase in velocity was not an obvious one. Frictional forces, acting in opposition to other kinds of forces, historically tended to hide the correct mathematical relationship between simple unopposed force and motion.
The correct behavior of objects accelerated by constant force was first discovered by Galileo in working with gravity (dropping stones and rolling cannonballs on an incline), although it was not until Newton that gravity was seen as a force. Newton generalized the behavior of constant acceleration, or constant momentum gain, to forces other than gravity. He asserted in his second law of motion that this behavior of constant momentum increase was characteristic of all forces-- including the “forces” of ordinary experience, such as tension or the stress produced by pushing on an object with a finger. In fact, he defined force as mass times acceleration, or more accurately, as a rate of change of momentum. Though, he understood that his definition is incorrect because it is a circular definition. The definition of term “force” needs a definition of the term Inertial frame of reference which is defined using the term “force”. Therefore the definition of the term “force” can be only intuitive. This problem was solved in 20th century in quantum field theory and general relativity which use this term only secondarily and it is not necessary to define it in these theories at all.
- A heavy object on a table is pulled (attracted) downward toward the floor by the force of gravity (i.e., its weight). At the same time, the table resists the downward force with equal upward force (called the normal force), resulting in zero net force, and no acceleration. (If the object is a person, he actually feels the normal force acting on him from below.)
- A heavy object on a table is gently pushed in a sideways direction by a finger. However, it fails to accelerate sideways, because the force of the finger on the object is now opposed by a new force of static friction, generated between the object and the table surface. This newly generated force exactly balances the force exerted on the object by the finger, and again no acceleration occurs. The static friction increases or decreases automatically. If the force of the finger is increased (up to a point), the opposing sideways force of static friction increases exactly to the point of perfect opposition.
- A heavy object on a table is pushed by a finger hard enough that static friction cannot generate sufficient force to match the force exerted by the finger, and the object starts sliding across the surface. If the finger is moved with a constant velocity, it needs to apply a force that exactly cancels the force of kinetic friction from the surface of the table and then the object moves with the same constant velocity. Here it seems to the naive observer that application of a force produces a velocity (rather than an acceleration). However, the velocity is constant only because the force of the finger and the kinetic friction cancel each other. Without friction, the object would continually accelerate in response to a constant force.
- A heavy object reaches the edge of the table and falls. Now the object, subjected to the constant force of its weight, but freed of the normal force and friction forces from the table, gains in velocity in direct proportion to the time of fall, and thus (before it reaches velocities where air resistance forces becomes significant compared to gravity forces) its rate of gain in momentum and velocity is constant. These facts were first discovered by Galileo.
Quantitative definition [सम्पादन]
Force is defined as the rate of change of momentum with time:
The quantity (where is the mass and is the velocity) is called the momentum. This is the only definition of force known in physics (first proposed by Newton himself). If the mass m is constant in time, then Newton's second law can be derived from this definition:
where is the acceleration.
This is the form Newton's second law is usually taught in introductory physics courses in order to avoid calculus notation.
All known forces of nature are defined via the above Newtonian definition of force. For example, weight (force of gravity) is defined as mass times acceleration of free fall: w = mg; spring balance force is defined as the force equilibrating certain gravitational force (say, the weight of 1 kg mass near Earth surface results in reaction force of spring equivalent to 9.8 N), etc. Calibration of spring balances (of various kinds) using either gravitational force or motion with known acceleration is important starting procedure in measuring many other forces (such as friction forces, reaction forces, electric forces, magnetic force, etc) in various physics labs.
It is not always the case that m is independent of t. For example, the mass of a rocket decreases as its propellant is ejected. Under such circumstances, the above equation () is incorrect, and the original form of Newton's second law must be used.
Because momentum is a vector, then force, being its time derivative, is also a vector - it has magnitude and direction, and four-force is a four-vector in relativity. Vectors (and thus forces) are added together by their components. When two forces act on an object, the resulting force, the resultant, is the vector sum of the original forces. This is called the principle of superposition. The magnitude of the resultant varies from the difference of the magnitudes of the two forces to their sum, depending on the angle between their lines of action. As with all vector addition this results in a parallelogram rule: the addition of two vectors represented by sides of a parallelogram, gives an equivalent resultant vector which is equal in magnitude and direction to the transversal of the parallelogram. If the two forces are equal in magnitude but opposite in direction, then the resultant is zero. This condition is called static equilibrium, with the result that the object remains at its constant velocity (which could be zero). Static equilibrium is mathematically equivalent to the motion expected with equal and oppositely directed accelerations (of course it is the same motion as with no acceleration).
As well as being added, forces can also be broken down (or 'resolved'). For example, a horizontal force pointing northeast can be split into two forces, one pointing north, and one pointing east. Summing these component forces using vector addition yields the original force. Force vectors can also be three-dimensional, with the third (vertical) component at right-angles to the two horizontal components.
In most explanations of mechanics, force is usually defined only implicitly, in terms of the equations that work with it. Some physicists, philosophers and mathematicians, such as Ernst Mach, Clifford Truesdell and Walter Noll, have found this problematic and sought a more explicit definition of force.
Force in special relativity [सम्पादन]
In the special theory of relativity mass and energy are equivalent (as can be seen by calculating the work required to accelerate a body). When an object's velocity increases so does its energy and hence its mass equivalent (inertia). It thus requires a greater force to accelerate it the same amount than it did at a lower velocity. The definition remains valid, but the momentum is given by:
- is the velocity and
- is the speed of light.
The relativistic expression relating force and acceleration for a particle with non-zero rest mass moving in the direction is:
where the Lorentz factor
Here a constant force does not produce a constant acceleration, but an ever decreasing acceleration as the object approaches the speed of light. Note that is undefined for an object with a non zero rest mass at the speed of light, and the theory yields no prediction at that speed.
One can however restore the form of
Force and potential [सम्पादन]
Instead of a force, the mathematically equivalent concept of a potential energy field can be used for convenience. For instance, the gravitational force acting upon a body can be seen as the action of the gravitational field that is present at the body's location. Restating mathematically the definition of energy (via definition of work), a potential field is defined as that field whose gradient is equal and opposite to the force produced at every point:
Forces can be classified as conservative or nonconservative. Conservative forces are equivalent to the gradient of a potential, and include gravity, electromagnetic force, and spring force. Nonconservative forces include friction and drag. However, for any sufficiently detailed description, all forces are conservative.
Types of force [सम्पादन]
Many forces exist: the Coulomb force (between electrical charges), gravitational force (between masses), magnetic force, frictional forces, centrifugal forces (in rotating reference frames), spring force, magnetic forces, tension, chemical bonding and contact forces to name a few.
Only four fundamental forces of nature are known: the strong force, the electromagnetic force, the weak force, and the gravitational force. All other forces can be reduced to these fundamental interactions.
The modern quantum mechanical view of the first three fundamental forces (all except gravity) is that particles of matter (fermions) do not directly interact with each other but rather by exchange of virtual particles (bosons) (as, for example, virtual photons in case of interaction of electric charges).
In general relativity, gravitation is not strictly viewed as a force. Rather, objects moving free in gravitational fields (say, a basket ball) simply undergo inertial motion along a straight line in the curved space-time (straight line in curved space-time is defined as the shortest space-time path between two points, and it is called geodesic). This straight line in space-time is a curved line in space, and we call it the "ballistic trajectory" of the object (an example would be a parabola for a basketball moving in a uniform gravitational field). The time derivative of the changing momentum of the body is what we label as "gravitational force" (=weight).
Units of measurement [सम्पादन]
The SI unit used to measure force is the newton (symbol N), which is equivalent to kg·m·s−2. The earlier CGS unit is the dyne. The relationship F=m·a can be used with either of these. In Imperial engineering units, if F is measured in "pounds force" or "lbf", and a in feet per second squared, then m must be measured in slugs. Similarly, if mass is measured in pounds mass, and a in feet per second squared, the force must be measured in poundals. The units of slugs and poundals are specifically designed to avoid a constant of proportionality in this equation.
A more general form F=k·m·a is needed if consistent units are not used. Here, the constant k is a conversion factor dependent upon the units being used.
When the standard 'g' (an acceleration of 9.80665 m/s²) is used to define pounds force, the mass in pounds is numerically equal to the weight in pounds force. However, even at sea level on Earth, the actual acceleration of free fall is quite variable, over 0.53% more at the poles than at the equator. Thus, a mass of 1.0000 lb at sea level at the equator exerts a force due to gravity of 0.9973 lbf, whereas a mass of 1.000 lb at sea level at the poles exerts a force due to gravity of 1.0026 lbf. The normal average sea level acceleration on Earth (World Gravity Formula 1980) is 9.79764 m/s², so on average at sea level on Earth, 1.0000 lb will exerts a force of 0.9991 lbf.
The equivalence 1 lb = 0.453 592 37 kg is always true, by definition, anywhere in the universe. If you use the standard 'g' which is official for defining kilograms force to define pounds force as well, then the same relationship will hold between pounds-force and kilograms-force (an old non-SI unit is still used). If a different value is used to define pounds force, then the relationship to kilograms force will be slightly different—but in any case, that relationship is also a constant anywhere in the universe. What is not constant throughout the universe is the amount of force in terms of pounds-force (or any other force units) which 1 lb will exert due to gravity.
By analogy with the slug, there is a rarely used unit of mass called the "metric slug". This is the mass that accelerates at one metre per second squared when pushed by a force of one kgf. An item with a mass of 10 kg has a mass of 1.01972661 metric slugs (= 10 kg divided by 9.80665 kg per metric slug). This unit is also known by various other names such as the hyl, TME (from a German acronym), and mug (from metric slug).
Another unit of force called the poundal (pdl) is defined as the force that accelerates 1 lbm at 1 foot per second squared. Given that 1 lbf = 32.174 lb times one foot per second squared, we have 1 lbf = 32.174 pdl. The kilogram-force is a unit of force that was used in various fields of science and technology. In 1901, the CGPM improved the definition of the kilogram-force, adopting a standard acceleration of gravity for the purpose, and making the kilogram-force equal to the force exerted by a mass of 1 kg when accelerated by 9.80665 m/s². The kilogram-force is not a part of the modern SI system, but is still used in applications such as:
- Thrust of jet and rocket engines
- Spoke tension of bicycles
- Draw weight of bows
- Torque wrenches in units such as "meter kilograms" or "kilogram centimetres" (the kilograms are rarely identified as units of force)
- Engine torque output (kgf·m expressed in various word orders, spellings, and symbols)
- Pressure gauges in "kg/cm²" or "kgf/cm²"
In colloquial, non-scientific usage, the "kilograms" used for "weight" are almost always the proper SI units for this purpose. They are units of mass, not units of force.
The symbol "kgm" for kilograms is also sometimes encountered. This might occasionally be an attempt to distinguish kilograms as units of mass from the "kgf" symbol for the units of force. It might also be used as a symbol for those obsolete torque units (kilogram-force metres) mentioned above, used without properly separating the units for kilogram and metre with either a space or a centered dot.
Below are several conversion factors between various measurements of force:
- 1 dyne = 10-5 newtons
- 1 kgf (kilopond kp) = 9.80665 newtons
- 1 metric slug = 9.80665 kg
- 1 lbf = 32.174 poundals
- 1 slug = 32.174 lb
- 1 kgf = 2.2046 lbf
स्वया दिसं [सम्पादन]
- एंगुलर मोमेन्टम
- कन्जरभेसन विधान
- मोमेन्ट म्याप
- Noether's theorem
- भौतिक शास्त्र
- Parker, Sybil (1993). Encyclopedia of Physics, p 443,. Ohio: McGraw-Hill. ISBN 0-07-051400-3.
- Corbell, H.C., Philip Stehle (1994). Classical Mechanics p 28,. New York: Dover publications. ISBN 0-486-68063-0.
- Halliday, David, Robert Resnick; Kenneth S. Krane (2001). Physics v. 1. New York: John Wiley & Sons. ISBN 0-471-32057-9.
- Serway, Raymond A. (2003). Physics for Scientists and Engineers. Philadelphia: Saunders College Publishing. ISBN 0-534-40842-7.
- Tipler, Paul (2004). Physics for Scientists and Engineers: Mechanics, Oscillations and Waves, Thermodynamics, 5th ed., W. H. Freeman. ISBN 0-7167-0809-4.